Barndominiums, Metal Buildings & Roofing in Austin County: Bellville, Sealy & Industry
Exteriors of Texas (EOT Builders) builds barndominiums, metal shops and barns, and custom homes in Austin County, and we roof homes and ag buildings there too. Bellville is about 75 minutes from our office on Tamina Road, and New Ulm, at the western edge of our area, is closer to an hour and 45 minutes. Barndominium shells typically run $50–$80 per sq ft and take about 2–4 months. Move-in-ready builds typically run $135–$200+ per sq ft under roof. Insured and bonded, since 2016. Call 281-766-3333.
Which Austin County towns do you serve?
Bellville, Kenney, New Ulm and Industry, plus Sealy and San Felipe for properties north of I-10. Next door in Waller County, see Hempstead and Waller.
What does Austin County require before I build?
Austin County's process is simple, but the order matters:
- 9-1-1 address first. You request it from the Austin County Emergency Communications District in Bellville. Inside Sealy city limits, the address comes from Sealy City Hall instead.
- Development Permit. You need it before anything is built or moved onto the property, from a house to a barn. You submit the recorded deed and the 9-1-1 address letter to Austin County Planning & Development in Bellville. If the land is in a flood hazard area, a surveyor's elevation certificate is required first.
- Septic (OSSF) permit. It's issued only after the development permit. The county suggests filing 3–4 weeks before installation, and the application has to be in the owner's name.
- Post it. The 9-1-1 address and permits must be posted for the final inspection.
The county's guidelines also note one residential structure per one-acre tract and a 12-by-12-foot clear entrance from the county road for emergency vehicles. Starting before you have permits doubles the fees. Inside Bellville or Sealy, the city's own building rules apply. We handle the filings and plan the pad, driveway and septic location together.
How much does a barndominium cost in Austin County?
Expect shell packages around $50–$80 a square foot, built in roughly 2–4 months. A finished barndominium or custom home usually comes in at $135–$200+ a square foot under roof, over roughly 7–10+ months. Clearing, the pad, culvert, septic, well and power are priced on their own. More detail: Barndominium Shell Cost.
Bellville
Bellville is the Austin County seat, where the courthouse and the county's planning office are. We build barndominium shells, metal shops and custom homes on acreage around Bellville, and we roof homes and barns with shingles or standing seam metal. Inside city limits, we confirm Bellville's own requirements first.
Sealy & San Felipe (north of I-10)
Sealy and San Felipe sit on I-10, and we take projects on the north side. San Felipe is home to the San Felipe de Austin State Historic Site. The town handles septic permitting inside its limits, while Sealy issues its own addresses and building permits inside the city. Outside both, Austin County's development permit applies. We build shops and shells here and do roof replacements on homes and ag buildings.
Industry
Industry, in western Austin County, was the first permanent German settlement in Texas, founded in 1831. Austin County runs the septic program inside the City of Industry as well as in the unincorporated county. We build barndominiums, metal barns and shops on the rolling acreage around town.
New Ulm
New Ulm is at the far western edge of our area. Its tracts suit metal barns, equipment sheds and barndominium shells. Because of the distance, we schedule New Ulm projects as full builds rather than small repairs. Call to confirm.
Kenney
Kenney is a small community northwest of Bellville, toward the Washington County line. We build shells, shops and custom homes on acreage here and roof homes and outbuildings. Just north, see Brenham.
Metal buildings, barns and shops
We design metal buildings around how you'll use them: equipment and hay barns, workshops, RV and boat storage, and garages with living space. Each building is quoted to its size, doors and site, and the pad and driveway are planned with it. See Metal Buildings.
Roofing in Austin County
We replace and repair roofs on farmhouses, newer homes, barns and shops, using shingles or standing seam metal. When hail or wind hits, we inspect and document the damage so your insurance claim is backed by photos and measurements. Our crew is CertainTeed ShingleMaster certified. More on standing seam metal, residential roofing and storm damage.
Frequently asked questions
Do I need a 9-1-1 address before an Austin County permit?
Yes. Austin County asks for the 9-1-1 address letter from the Emergency Communications District with the development application. Inside Sealy city limits, Sealy City Hall assigns the address.
Does Austin County do building inspections?
The county issues a development permit, which covers floodplain and siting, and does a final check that the address and permits are posted. Inside Bellville or Sealy, the city handles building permits.
Do you build south of I-10 in Sealy?
No. In Sealy and San Felipe, we take projects on the north side of I-10.
Can I put more than one house on my tract?
Austin County's permit guidelines call for one residential structure per one-acre tract, so the lot size has to support each home. We check this before design.
Can you roof a barn as well as a house?
Yes. We put shingle or standing seam metal roofs on homes, and metal roofs on barns, shops and equipment sheds.
Plan your Austin County build
Get My Free Quote or call 281-766-3333. Have your property ID or address ready, and we'll start with the 9-1-1 address and flood map check.
Exteriors of Texas (EOT Builders) · 33030 Tamina Rd Ste 100, Magnolia, TX 77354 · 281-766-3333 · Mon–Fri 8 AM–6 PM, after-hours emergency service available.

